have questions?
No Duties or Brokerage
We know our products
Always the correct part
Free shipping over $499
Fit Matters
The right solution for every application
An optimized car setup begins with the perfect wheel and tire fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. The ARC-8's wide range of widths, diameters, offsets and face profiles result in unique fitments ranging from 8.5" to 10.5" wide. Each wheel combines these features to meet the different brake caliper, strut, and fender clearance needs of each BMW model. Most vehicle models have options for wheels that range from direct-fit to aggressive for specialty applications.
Face Profile
One design, many levels of beauty
The ARC-8 wheel is available in two unique face profiles. The shallower face provides increased caliper clearance on narrow applications, while the deeper concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide width applications. Concavity is dependent on fitment, and not selected independently.
Spokes
More than just a pretty face
The spokes of the ARC-8 were designed to be robust where they need to be and extra lightweight where they can be. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. The lack of a deep front lip and spokes that connect directly to the barrel's lip create a rigid wheel with even load distribution. These features help reduce one of the most common concerns with aftermarket wheels — bending. Beauty follows function with this extremely popular design, as it adapts perfectly to both flat and concave versions.
Brake Clearance
A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the ARC-8 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. We 2D modeled most Big Brake Kits available in Solidworks and tweaked the wheel design of the ARC-8 prior to production in order to fit as many kits as possible.
Open Hub Center
Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the ARC-8 wheel features a wide open hub center that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric
No rings or adapters here
All APEX ARC-8 wheels are purpose built for select vehicle applications, and centering rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm center bore.
Center Cap
A factory fit and finish
We don't reuse one cap design for all of our wheels. Every ARC-8 wheel is designed to work with factory center caps. You can easily replace APEX center caps with OEM roundels for a clean factory look. The ARC-8 wheels will ship with our Gloss Black center cap that mimics the size and shape of a BMW factory center cap.
Wheel Hardware
Original or Aftermarket, it all works
The ARC-8 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The ARC-8 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors
They all fit
TPMS sensors, which monitor tire pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the ARC-8 wheel doesn't end with center caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
Flow Forming
Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminum into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications
Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and we have the proof to back it up. Learn more about false VIA claims.
Japan’s JWL is a commonly followed standard for wheel load ratings. Our flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy. Learn more about wheels that aren’t JWL.
Weight & Strength Optimization
It’s all in the details
Various design features were implemented to ensure that the ARC-8 wheel design was as light and durable as possible. We began with a strong one-piece design featuring an open hub center and reliefs in the mounting pad to remove weight between lug holes. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a light weight wheel with extra strength in all the right places, while keeping weight to a minimum.
Finishes
Because being faster is just not enough
The ARC-8 wheel is available in multiple finishes, in addition to exclusive finishes available only through select dealers. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss metallic finishes, and semi-gloss or matte finishes. Hyper finishes include an additional coating of a premium liquid-like metallic silver to create a uniquely bright finish that can only be achieved through misting liquid paint.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of chipping the paint to more visible sections. The ARC-8 wheel's coating process leaves lug holes, center bores and mounting pads unpainted, which ensures proper fit and torque values.
Lifetime Warranty
A wheel you can depend on
As of recent, all our wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. See here for full terms and conditions.
50% Off Replacement Wheels
Hit those berms like you don’t care
Do some serious damage to a wheel that’s not covered under warranty? No worries. Curb rash or even totally mangling a wheel in a car accident is covered by our APEX360° program. We offer replacements for wrecked wheels at 50% off our standard prices. See our full terms and conditions for more details.
When Will This Ship?
Please confirm availability on the products page...
In Stock This product will ship within one business day. Available for local pickup in Québec, Canada.
Direct Ship Subject to supplier' stock. Orders typically ship within 2 to 3 business days.
Regularly Stocked Product This product is in stock from our supplier. Orders typically ship within 6 to 12 business days.
Warehouse Transfer Subject to supplier' stock. Orders typically ship within 6 to 12 business days.
On Order This item is on its way to our warehouse.
Back Order This part is back-ordered therefore shipping time will vary.
No Longer Available The manufacturer no longer sells this item, and we can no longer get it from any of our suppliers.
*The processing time and availability are subject to the suppliers’ stock.
Need it faster?
Feel free to reach out before placing your order if you need it faster or require further assistance! 😊
Free Shipping
All orders of $499 or more being shipped within Canada qualify for free standard shipping. Additionally, orders less than $499 qualify for an exclusive low shipping rate.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
In-Stock Products
In Stock
Items marked as "In Stock" are physically in our facility, so they're ready to ship when the order is placed. If all items in your order are "In Stock", then your order typically ships within one business day.
Other Availability Modes
We use several availability modes to most accurately identify when products will leave their home facility:
Direct Ship This product is available and will be sourced from one of our suppliers. It may take up to three business days before it ships.
Warehouse Transfer We receive the item, then we ship it to remain on time with the guaranteed delivery range chosen at checkout. It typically takes between 6 and 12 business days before it ships.
Discontinued - No longer available This product has been discontinued by the manufacturer and is no longer available.
We update our catalog daily to provide the most accurate fitment information possible. When shopping for parts, please use the “select your vehicle” car selector on the home page. Once you've selected your car, you can filter parts specific to it.
Additionally, on each product page, we have a tab for fitment information. By clicking on "Fitment", you can scroll and verify the part you are about to add to your cart indeed fits.
Furthermore, if you have a vehicle added to our vehicle selector and you are viewing a product page, you'll see fitment information below the "add to cart" button. If an item fits your car it will display "This Part Fits Your: Selected Vehicule". If an item does not fit your vehicle a message will display "This Part Does Not Fit".
A “Core Charge” is similar to the deposit you might pay for a can or bottle of soda. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Many automotive parts have Core Charges that work the same way as a soda can deposit. The most common car parts that include a core charge are alternators, calipers, steering racks, and fuel injectors.
"MAP" pricing, or Minimum Advertised Pricing, means that the vendor set a minimum retail price that we're not allowed to violate. MAP items cannot be discounted because the decrease in price would violate that threshold.
APEX
Fit MattersThe right solution for every application An optimized car setup begins with the perfect wheel and tire fitment. Without model-
APEX
ARC-8 DESIGN Fit MattersThe right solution for every application An optimized car setup begins with the perfect wheel and tire fit
APEX
FEATURES THE FLOW FORM ADVANTAGE Flow forming enables us to create high performance wheels without the price premium of forging. It improves the mechanic
APR
The APR A01 Flow Formed Wheels are manufactured using the latest strengthening and weight savings techniques to provide an attractive solution ready for the street and track. This race inspired wheel...
