have questions?
No Duties or Brokerage
We know our products
Always the correct part
Free shipping over $499
Your 2016-2018 Audi A6/A7 3.0T with the updated CREC supercharged engine capable of massive power gains in only minutes from an IE ECU Tune. Unleash hidden horsepower and torque to turn your sporty A6 or A7 into an extremely competitive powerhouse!
Gain up to 166hp on stock hardware
Up to 524hp with a supercharger pulley upgrade
IE ECU calibrations are dedicated to perfecting every section of the mapping to deliver a fully realized performance file right out of the gate. Maximized for full performance potential on the drag strip and road coarse while maintaining full comfort and reliability on your daily commute. Get ready to experience IE's Performance Software For your Audi CREC 3.0T Supercharged engine in only minutes from the comfort of your home garage or driveway.
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors. Peak numbers require transmission TCU Tune (sold separately).
| STAGE / FUEL | HORSEPOWER | TORQUE |
| Stock Audi advertised numbers | 340 HP | 333 FT-LBS |
| Stock IE dyno numbers | 340 HP | 347 FT-LBS |
| Stage 1 91 AKI / 95 RON | 423 HP | 384 FT-LBS |
| Stage 1 93 AKI / 98 RON | 432 HP | 391 FT-LBS |
| Stage 1 E85 | 506 HP | 414 FT-LBS |
| Single Pulley 91 AKI / 95 RON | 438 HP | 388 FT-LBS |
| Single Pulley 93 AKI / 98 RON | 446 HP | 395 FT-LBS |
| Single Pulley E85 | 524 HP | 438 FT-LBS |
| PART UPGRADE | COMPATIBLE | REQUIREMENT |
| TRANSMISSION TUNE | | Required For Peak Power Gains |
| AIR INTAKE | | Fully Compatible With All Stages |
| HEAT EXCHANGER | | Fully Compatible With All Stages |
| IE DOWNPIPES | | Fully Compatible With All Stages |
| UPPER PULLEY | N | Not Compatible With Stage 1 |
| LOWER PULLEY | N | Not Compatible With Stage 1 |
STAGE 2 SINGLE PULLEY
| PART UPGRADE | COMPATIBLE | REQUIREMENT |
| UPPER PULLEY | | Required |
| HEAT EXCHANGER | | Required |
| TRANSMISSION TUNE | | Required For Peak Power Gains |
| AIR INTAKE | | Fully Compatible With All Stages |
| IE DOWNPIPES | | Fully Compatible With All Stages |
| LOWER PULLEY | N | Not Compatible With Stage 1 |
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
All stages of IE ECU calibrations for the C7.5 A6 & A7 are compatible with the matching IE ZF8 AL551 Transmission TCU Tune and is highly recommended to reach the advertised power figures. Without a matching TCU tune, the transmission will short shift the powerband at 6300 RPM vs. the ECU tune's peak power at 7200RPM -leaving power on the table. Adding the TCU upgrade also modifies shift speed, torque limit maps, line pressure, and launch control functions resulting in a complete ECU & TCU performance package.
IE guarantee -45 days risk free
Horsepower & torque gains maximized
Optimized for all climates & conditions
91, 93, & E85 octanes available (95, 98, RON & E85)
ECU safely adapts between E65-E85 Ethanol
Rev limiter increased to 7200 RPM (requires TCU tune)
Cluster reprogrammed to show new 7200 RPM limit
Auto start/stop disabled
Activates brake boosting
Road speed limiters removed
Direct port OBDII at-home flashing
Easy octane switching takes only minutes
Upgrade stages to match hardware upgrades
Simple on/off feature toggling
Read and clear diagnostic/problem codes
Easy to use Data-logger
E85 fuel unlocks the most performance potential from our ECU tunes for your Audi A6 or A7 3.0T. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is more readily available (in most states) and less expensive than race gas. Safeguards are included within the E85 ECU calibrations to adjust for ethanol as low as E60 to allow safe fill ups even if the ethanol content is lower than advertised. E85 is an optional fuel map included with all tune purchases.
Commonly used in roll racing, Brake Boosting allows you to build extra boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" or extra surge of power. Brake Boost is included on all tune stages.
Take full advantage of your supercharger with a larger power band. RPM limits have been raised to 7200RPM in all stages. This higher RPM limit not only extends the power band, but also unlocks 20+HP in the upper RPM range! Transmission TCU Tune is required to unlock higher RPM.
To combat power-robbing heat soak generated from the supercharged engine the factory coolant pump calibration has been modified in all ECU Tune stages. This new configuration runs the coolant pump at 50% duty when the ignition is keyed on pushing coolant through the charge coolers and reducing heat faster without the engine running. This helps avoid heat soak and provides faster recovery in-between runs or while staging at the track. During driving or when the intake temp is above 20C, the coolant pump operates at 100% for maximum cooling efficiency.
IE's fully proven software brings track-ready ECU programming to your supercharged V6 engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory ECU mapping, allowing our software engineers access to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!
| MAKE | MODEL | YEAR | GENERATION | ENGINE |
| AUDI | A6 | 2016-2018 | C7.5 | 3.0T Supercharged (CREC engine code) |
| AUDI | A7 | 2016-2018 | C7.5 | 3.0T Supercharged (CREC engine code) |
NOTE: Tune compatibility is only for 3.0T CREC engines with 8 speed AL551 ZF8 transmission. Not compatible with Rest Of World (ROW) vehicles equipped with 7 speed DSG transmission.
WHAT IS CREC? CREC is the engine code for the updated 3.0T Supercharged engines found in 2016-2018 Audi A6 & A7 chassis. The CREC variation includes numerous changes from the previous generations of the 3.0T platform including a dual direct and port injection fuel system, supercharger refinements, a new ECU, and many other changes. The easiest way to verify if you have a CREC engine is to check the upper supercharger pulley; CREC is equipped with a 4 bolt supercharger pulley where as all previous gen engines have a press-on pulley. Still not sure? Don't worry, our IE POWERlink cable will identify the correct tune for you car automatically.
When Will This Ship?
Please confirm availability on the products page...
In Stock This product will ship within one business day. Available for local pickup in Québec, Canada.
Direct Ship Subject to supplier' stock. Orders typically ship within 2 to 3 business days.
Regularly Stocked Product This product is in stock from our supplier. Orders typically ship within 6 to 12 business days.
Warehouse Transfer Subject to supplier' stock. Orders typically ship within 6 to 12 business days.
On Order This item is on its way to our warehouse.
Back Order This part is back-ordered therefore shipping time will vary.
No Longer Available The manufacturer no longer sells this item, and we can no longer get it from any of our suppliers.
*The processing time and availability are subject to the suppliers’ stock.
Need it faster?
Feel free to reach out before placing your order if you need it faster or require further assistance! 😊
Free Shipping
All orders of $499 or more being shipped within Canada qualify for free standard shipping. Additionally, orders less than $499 qualify for an exclusive low shipping rate.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
In-Stock Products
In Stock
Items marked as "In Stock" are physically in our facility, so they're ready to ship when the order is placed. If all items in your order are "In Stock", then your order typically ships within one business day.
Other Availability Modes
We use several availability modes to most accurately identify when products will leave their home facility:
Direct Ship This product is available and will be sourced from one of our suppliers. It may take up to three business days before it ships.
Warehouse Transfer We receive the item, then we ship it to remain on time with the guaranteed delivery range chosen at checkout. It typically takes between 6 and 12 business days before it ships.
Discontinued - No longer available This product has been discontinued by the manufacturer and is no longer available.
We update our catalog daily to provide the most accurate fitment information possible. When shopping for parts, please use the “select your vehicle” car selector on the home page. Once you've selected your car, you can filter parts specific to it.
Additionally, on each product page, we have a tab for fitment information. By clicking on "Fitment", you can scroll and verify the part you are about to add to your cart indeed fits.
Furthermore, if you have a vehicle added to our vehicle selector and you are viewing a product page, you'll see fitment information below the "add to cart" button. If an item fits your car it will display "This Part Fits Your: Selected Vehicule". If an item does not fit your vehicle a message will display "This Part Does Not Fit".
A “Core Charge” is similar to the deposit you might pay for a can or bottle of soda. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Many automotive parts have Core Charges that work the same way as a soda can deposit. The most common car parts that include a core charge are alternators, calipers, steering racks, and fuel injectors.
"MAP" pricing, or Minimum Advertised Pricing, means that the vendor set a minimum retail price that we're not allowed to violate. MAP items cannot be discounted because the decrease in price would violate that threshold.
Integrated Engineering
Integrated Engineering
WHICH TUNE IS RIGHT FOR YOU?
034Motorsport
034Motorsport is proud to unveil an all-new line of Performance Software for C7.5 Audi A6/A7 3.0 TFSI models equipped with the Simos 16 ECU! Flashed directly through your vehicle’s OBD-II port,...
Integrated Engineering
IE's HPFP internals upgrade kit for the Audi 3.0TFSI Supercharged engines is perfect for the DIY user looking to upgrade their factory-equipped HPFP pump body with new higher flowing internals...
