have questions?
No Duties or Brokerage
We know our products
Always the correct part
Free shipping over $499
034Motorsport Performance Software for B8/B8.5 Audi S4/S5/Q5/SQ5 models equipped with the powerful 3.0 TFSI Supercharged V6 engine is flashed directly through your vehicle's OBD-II port. 034Motorsport’s proprietary calibrations for the Simos 8 ECU safely and effectively increase the power output of the 3.0 TFSI engine. The result is a noticeable improvement in acceleration and throttle response, without any sacrifice in driveability or reliability.
034Motorsport's 3.0 TFSI Performance Software was developed entirely in-house on 034Motorsport's Development B8 Audi S4. The calibrations were then refined on multiple enthusiast-owned B8/B8.5 Audi S4/S5 vehicles before release.
Once again, 034Motorsport has pushed the boundaries of what is possible for the 3.0T Supercharged engines found in many Audi’s through our Dynamic+ tuning! After extensive development and refinement by our world-class tuning team, all existing and future 034Motorsport tuning customers will have access to all Advanced Launch Control programs.
These features allow you to customize your desired launch RPM on the fly via your cruise control stalk, and run the intercooler pumps and engine fans at full speed below 10kph to allow for full cooling during staging prior to drag racing. This provides a large advantage over factory launching protocols as it results in the coolest possible IATs, and allows the driver to adjust their launch settings to be the most optimal for their conditions.
| STAGE | FUEL | MAX HP | MAX TQ | MAX HP GAIN | MAX TQ GAIN | REV LIMITER* | SPEED LIMITER |
|---|---|---|---|---|---|---|---|
| Stock | 91 Oct (AKI) | 332 HP | 318 TQ | NA | NA | 6,500 RPM | 150 MPH |
| Stage 1 | 91 Oct (AKI) | 430 HP | 374 TQ | 98 HP @ 7,100 RPM | 72 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 1 | 93 Oct (AKI) | 438 HP | 374 TQ | 106 HP @ 7,100 RPM | 78 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 1 | 100 Oct (AKI) | 444 HP | 374 TQ | 112 HP @ 7,100 RPM | 83 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 1 | 104 Oct (AKI) | 453 HP | 378 TQ | 121 HP @ 7,100 RPM | 89 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 2 | 91 Oct (AKI) | 450 HP | 387 TQ | 118 HP @ 7,100 RPM | 87 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 2 | 93 Oct (AKI) | 455 HP | 389 TQ | 123 HP @ 7,100 RPM | 91 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 2 | 100 Oct (AKI) | 465 HP | 400 TQ | 133 HP @ 7,100 RPM | 98 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 2 | 104 Oct (AKI) | 470 HP | 406 TQ | 138 HP @ 7,100 RPM | 102 TQ @ 7,100 RPM | 7,200-7,400 RPM | ∞ |
| Stage 2+ | 91 Oct (AKI) | ** TBD | ** TBD | ** TBD | ** TBD | 7,400-7,600 RPM | ∞ |
| Stage 2+ | 93 Oct (AKI) | ** TBD | ** TBD | ** TBD | ** TBD | 7,400-7,600 RPM | ∞ |
| Stage 2+ | 100 Oct (AKI) | ** TBD | ** TBD | ** TBD | ** TBD | 7,400-7,600 RPM | ∞ |
| Stage 2+ | 104 Oct (AKI) | ** TBD | ** TBD | ** TBD | ** TBD | 7,400-7,600 RPM | ∞ |
| Stage 2+ | E40 Blend (AKI) | 540 HP | 491 TQ | 208 HP @ 7,100 RPM | 174 TQ @4,720 RPM | 7,400-7,600 RPM | ∞ |
*If you have an automatic or DSG transmission rev limiter increases in the ECU will not change your maximum shift RPM. To increase the shift points you need performance TCU software as well
**Some octane variants are fully developed but have not yet undergone our dyno data colection process and as such the peak increases and power numbers are not yet listed, but you can expect similar gains to the difference of the octanes we have provided the full data collection and dyno information for.
***All octane ratings are in US standard AKI (RON+MON). Some ROW countries such as the UK use a RON octane rating that differs from US Octane ratings. Please email tuning@034motorsport.com to ensure you are running the correct octane file for your area. Running the incorrect octane file for your fuel can result in irreversible damage.
034Motorsport Stage 1 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost by controlling the supercharger bypass, while optimizing timing and fueling maps to extract additional power from the 3.0 TFSI engine.
Stage 1 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 1 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 1 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER
034Motorsport Stage 2 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 1 levels with the addition of 034Motorsport's 3.0 TFSI Supercharger Pulley Upgrade. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.
Stage 2 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER.
034Motorsport Stage 2+ Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034Motorsport's 179 or 190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.
Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2+ Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104, and E40 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER
| STAGE | REQUIRED MODIFICATIONS | RECOMMENDED MODIFICATIONS |
|---|---|---|
| Stage 1 |
|
|
| Stage 2 |
|
|
| Stage 2+ |
|
|
034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Requirements for End User Flashing:
034Motorsport End User Flashing Kit Contents:
When Will This Ship?
In stock This products will ship within one business day from our warehouse in Québec, Canada.
Direct ship This product will ship direct from our supplier. Processing time and availability is subject to suppliers stock.
Warehouse transfer This product could take up to 12 business days before leaving our warehouse for delivery. Availability is subject to suppliers stock.
Free Shipping
All orders of $499 or more being shipped within Canada qualify for free standard shipping. Additionally, orders less than $499 qualify for an exclusive low shipping rate.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
In-Stock Products
In Stock
Items marked as "In Stock" are physically in our facility, so they're ready to ship when the order is placed. If all items in your order are "In Stock", then your order typically ships within one business day.
Other Availability Modes
We use several availability modes to most accurately identify when products will leave their home facility:
Direct Ship This product is available and will be sourced from one of our suppliers. It may take up to three business days before it ships.
Warehouse Transfer We receive the item, then we ship it to remain on time with the guaranteed delivery range chosen at checkout. It typically takes between 6 and 12 business days before it ships.
Discontinued - No longer available This product has been discontinued by the manufacturer and is no longer available.
We update our catalog daily to provide the most accurate fitment information possible. When shopping for parts, please use the “select your vehicle” car selector on the home page. Once you've selected your car, you can filter parts specific to it.
Additionally, on each product page, we have a tab for fitment information. By clicking on "Fitment", you can scroll and verify the part you are about to add to your cart indeed fits.
Furthermore, if you have a vehicle added to our vehicle selector and you are viewing a product page, you'll see fitment information below the "add to cart" button. If an item fits your car it will display "This Part Fits Your: Selected Vehicule". If an item does not fit your vehicle a message will display "This Part Does Not Fit".
A “Core Charge” is similar to the deposit you might pay for a can or bottle of soda. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Many automotive parts have Core Charges that work the same way as a soda can deposit. The most common car parts that include a core charge are alternators, calipers, steering racks, and fuel injectors.
"MAP" pricing, or Minimum Advertised Pricing, means that the vendor set a minimum retail price that we're not allowed to violate. MAP items cannot be discounted because the decrease in price would violate that threshold.
034Motorsport
034Motorsport is proud to offer this high-quality Supercharger Pulley Upgrade for the B8/B8.5 Audi S4/S5/Q5/SQ5 & C7/C7.5 Audi A6/A7 3.0T FSI! At 57.70mm in diameter, the 034Motorsport 3.0 TFSI...
034Motorsport
034Motorsport is pleased to present Billet Aluminum Rear Subframe Mount Inserts for the B8/B8.5 Audi S4/RS4, S5/RS5, Q5/SQ5! The B8/B8.5 Audi S4/RS4, S5/RS5, and Q5/SQ5 use rubber rear...
034Motorsport
This Heavy-Duty Tie Rod End Pair fits B8/B8.5 Audi A4/S4, A5/S5/RS5 & Q5/SQ5 models, and includes drop-in replacements for the factory outer tie rods. 034Motorsport Tie Rod Ends feature all-metal...
Pure Turbos
Audi S4, S5 & SQ5 Pure750 Pure750 for Audi S4, S5 & SQ5 platforms Features: Larger Custom Billet Compressor Wheel Larger Hi-Flow Turbine Wheel Upgraded Bearing Housing VSR Balanced and...
034Motorsport
Complete factory subframe bolt kit for the B8.5 (Facelift) Audi A4/S4/RS4, A5/S5/RS5, and Q5/SQ5. We recommend using these new factory stretch bolts to install the
