null
×
close
+1.833.450.0095

Monday - Friday, 9am-5pm EST

Sale
contact-image.jpg

have questions?

  • 100% Canadian

    No Duties or Brokerage

  • In-House Experts

    We know our products

  • Guaranteed Fitment

    Always the correct part

  • Fast Delivery

    Free shipping over $499

ECS Tuning Stage 3 Performance Clutch Kit with Lightweight Forged Steel Flywheel (18.85lbs) - ES#4616063

(No reviews yet) Write a Review
$1,136.14
$1,079.33
SKU:
ES#4616063
Availability:
Warehouse Transfer
5 customers are viewing this product

ECS Tuning Stage 3 Performance Clutch Kit with Lightweight Forged Steel Flywheel (18.85lbs) - ES#4616063

$1,136.14
$1,079.33

All too often most larger compressor wheel, stock frame turbo upgrades produce power levels that would have required a heavy duty clutch kit that broke the bank (and your left leg). Our ECS Tuning In-House Engineered Stage 3 Clutch Kit bridges the gap in the market between ease of driving, price and torque holding capacity. This clutch kit continues our legacy of designing and creating top quality, affordable clutch and flywheel kits. Now available for your Volkswagen MK8 2.0T platform 6 speed manual transmission vehicles with power levels up to 450 ft/lbs. 

After a lengthy development process of in-house engineering, testing and retesting of multiple prototypes on vehicles with a larger, upgraded turbocharger, we are excited to give you our best clutch kit yet! Our kit is engineered to reliably hold 450 ft/lbs of crank torque and feature specifically selected components for performance and mild-mannered driving styles, while retaining enthusiast-minded control and feedback! Each kit includes a more reliable, lighter weight flywheel than factory for quicker revs while retaining fair balance between street and race driving conditions. Lastly, all necessary hardware is included for basic installation, such as flywheel bolts, pressure plate bolts and throwout bearing bolts. We even included a new LUK throwout bearing and a VW-Specific clutch alignment tool for proper crank bore engagement and clutch disc centering. 

 

PART DESIGN

  • CLUTCH DISC

    • 240mm segmented ceramic friction disc

    • Six dual stage clutch hub damping springs help to reduce gear noise, driveline chatter and provide smoother engagement

  • PRESSURE PLATE

    • Increased clamp force over OEM, rated at 2,500lbs of pressure

    • Zinc-coated for long term corrosion resistance 

  • THROWOUT BEARING

    • LUK OE spec for ease of install and reliable operation

  • CLUTCH ALIGNMENT TOOL

    • VW 2.0T Specific Design, made for perfect fitment into crank bore

    • Perfect clutch disc spline and size, easy removal with pull tab

    • PLEASE NOTE: Not all aftermarket clutch kits include this proper alignment tool! We ensured you receive the proper tool for trouble-free installation!

  • FLYWHEEL

    • 18.85 lb. single mass lightweight flywheel (31.5% reduction from stock)

    • Specifically selected weight for ideal combination between daily and sporty driving style; faster revving for quicker gear changes and less rev-hang

    • Precision CNC machined from Forged 4140-HT Chromoly Steel

      • Homogeneous material properties promotes even wear and has superior resistance to warpage and chatter

      • Heat Treated to 28-32 HRC for improved wear resistance

    • High precision balanced for exceptionally smooth operation at high rpm

    • Designed and tested by a 3rd party lab to meet SFI 1.1 specification for added quality assurance.

      • SFI 1.1 specifies the minimum requirements for material strength and quality, as well as a 3rd party lab spin test to 150% of redline for 1 hour to ensure integrity of material and design.

    • Black Oxide coated for corrosion resistance

 

INSTALLATION KIT CONTENTS

  • OEM Triple Square Flywheel Bolts - QTY 8

  • OEM-Grade Hex Head Pressure Plate Bolts - QTY 6

  • OEM Throwout Bearing Bolts - QTY 3

  • VW-Specific Plastic Clutch Alignment Tool

 

PERFORMANCE FEATURES

  • With our lighter weight flywheel and performance clutch kit you can expect quicker revs, faster acceleration, improved rev matching, less rev-hang and faster shifts. 

  • Lighter weight flywheel than the OEM dual mass flywheel (8.65lbs savings):

    • OEM 27.50lbs / ECS 18.85lbs 

 

PRODUCT DEVELOPMENT

  • From inception to completion, over a lengthy development process and multiple designs tested and re-tested, we are proud to finally offer what we believe is the very best clutch kit in this market, at the very best price! We partnered with a global clutch manufacturer for a performance clutch disc and pressure plate that met our standards and reliably holds 450 ft/lbs of torque. We designed and engineered our single mass lightweight flywheel and sent it out to a third-party balancing company for SFI 1.1 design testing. Although each flywheel is not numerically certified for SFI, the design meets all requirements for SFI 1.1 Certification. 

  • Tested on both of our ECS Tuning Shop MK7 GTI's with a larger turbocharger. See our dyno results on our ECS Tuning Rallywagen 2.0 equipped with an HPA OEM+ IS38 turbocharger that put down an impressive 363 ft/lbs of wheel torque (approximately 400 ft/lbs of crank torque) utilizing our in-house Mustang AWD 500 SE in ground dyno.

  • Our Clutch and Flywheel Kits were tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

 

INSTALLATION AND SUPPORT

  • Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information.

  • Break-In Recommendations:

    • Recommended break-in: 500-1,000 miles of light throttle city driving staying under 4,500 RPM. Make an effort to shift through the gears as much as possible to evenly break in the clutch and flywheel.

    • Try to avoid over slipping the clutch, such as prolonged bumper-to-bumper traffic, during the 500 mile break-in period.

    • Avoid hard launches or quick shifting until after the 500 mile break-in period has passed.

    • Do not use a clutch pedal stop during break in period 

 

**PLEASE NOTE:**

  • Fitment is for Evo4 TSI engines only 
  • Audible chatter from the transmission after installation is considered normal. As with most single mass flywheels there is less dampening in the flywheel to reduce "gear noise." This chatter noise may be more present when the transmission fluid temperatures are hotter and may be intensified by other modifications. Most TSI engines with the 02Q gearbox will experience some chatter noise at hotter temperatures. Please be advised that this noise will go away once the clutch pedal is depressed. This symptom may be lessened by adjusting transmission fluid weight, turning off electrical/driveline consumers (A/C, High Beams, ETC.) and by raising the RPM slightly. 
  • If your vehicle is still equipped with the OEM Clutch Bleeder Block / Delay Valve we STRONGLY encourage removing the restrictor or purchasing our ECS Tuning Billet Clutch Bleeder Block - ES2586656. If driven aggressively, with the OEM Delay Valve, the clutch disc is highly likely to slip, resulting in permanent wear to the clutch disc, flywheel and/or pressure plate surfaces, resulting in requiring replacement of these components. 
  • If used with ECS Clutch Pedal Stop adjustments may need to be made to obtain proper disengagement 

Kit Contents

Description Brand Qty
Throwout Bearing/slave Cylinder Assembly LUK - Corporate Logo 1
ECS Performance Stage 3 Clutch Kit ECS - Corporate Logo 1
Clutch Kit & Flywheel Installation Hardware Pack ECS - Corporate Logo 1
Forged 4140-HT Single Mass Lightweight Flywheel (18.85lbs) ECS - Corporate Logo 1

Installation

ECS Clutch Bleeding & Break-In

ECS Gen3/Evo4 Clutch/Flywheel In

Shipping

When Will This Ship?

Please confirm availability on the products page...

In Stock This product will ship within one business day. Available for local pickup in Québec, Canada.

Direct Ship Subject to supplier' stock. Orders typically ship within 2 to 3 business days.

Regularly Stocked Product This product is in stock from our supplier. Orders typically ship within 6 to 12 business days.

Warehouse Transfer Subject to supplier' stock. Orders typically ship within 6 to 12 business days.

On Order This item is on its way to our warehouse.

Back Order This part is back-ordered therefore shipping time will vary.

No Longer Available The manufacturer no longer sells this item, and we can no longer get it from any of our suppliers.

*The processing time and availability are subject to the suppliers’ stock.

Need it faster?

Feel free to reach out before placing your order if you need it faster or require further assistance! 😊

Free Shipping

All orders of $499 or more being shipped within Canada qualify for free standard shipping. Additionally, orders less than $499 qualify for an exclusive low shipping rate. 

Learn more...

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Learn more...

My part doesn't have a fitment guide.

We're so sorry about that, but we're working on it! We list over 100,000 SKUs and we're updating them daily. Some products are uploaded without the fitment guides being built out. If you're unsure about product fitment, please email us via support@exoperformance.ca.

  • How do I know if you have an item in stock?

    In-Stock Products

    In Stock

    Items marked as "In Stock" are physically in our facility, so they're ready to ship when the order is placed. If all items in your order are "In Stock", then your order typically ships within one business day.

    Other Availability Modes

    We use several availability modes to most accurately identify when products will leave their home facility:

    Direct Ship This product is available and will be sourced from one of our suppliers. It may take up to three business days before it ships.

    Warehouse Transfer We receive the item, then we ship it to remain on time with the guaranteed delivery range chosen at checkout. It typically takes between 6 and 12 business days before it ships.

    Discontinued - No longer available This product has been discontinued by the manufacturer and is no longer available.

  • How do I know if a part will fit my car?

    We update our catalog daily to provide the most accurate fitment information possible. When shopping for parts, please use the “select your vehicle” car selector on the home page. Once you've selected your car, you can filter parts specific to it.

    Additionally, on each product page, we have a tab for fitment information. By clicking on "Fitment", you can scroll and verify the part you are about to add to your cart indeed fits.

    Furthermore, if you have a vehicle added to our vehicle selector and you are viewing a product page, you'll see fitment information below the "add to cart" button. If an item fits your car it will display "This Part Fits Your: Selected Vehicule". If an item does not fit your vehicle a message will display "This Part Does Not Fit".

  • What is a core charge?

    A “Core Charge” is similar to the deposit you might pay for a can or bottle of soda. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Many automotive parts have Core Charges that work the same way as a soda can deposit. The most common car parts that include a core charge are alternators, calipers, steering racks, and fuel injectors.

  • What is MAP pricing? Why can't I get a discount on a MAP item?

    "MAP" pricing, or Minimum Advertised Pricing, means that the vendor set a minimum retail price that we're not allowed to violate. MAP items cannot be discounted because the decrease in price would violate that threshold.

Free Shipping over $499

More Information*

Lowest Price Guarantee

More Information*

Secure Checkout Guarantee

More Information*

30-Day Free Returns

More Information*
to top